# Rocky Linux and Houston UI - Troubleshooting and where to report S/W and H/W issues **URL:** \ **Category:** Software & Applications\ **Created:** [November 8, 2023, 4:24pm UTC](https://forum.45homelab.com/t/rocky-linux-and-houston-ui-troubleshooting-and-where-to-report-s-w-and-h-w-issues/584 "2023-11-08T16:24:21Z")\ **Posts on this page:** 1\ **Showing post:** 8
**Author:** ![orix](https://forum.45homelab.com/letter_avatar_proxy/v4/letter/o/59ef9b/32.png) [@orix](https://forum.45homelab.com/u/orix)\ **Post date:** [November 9, 2023, 2:45pm UTC](https://forum.45homelab.com/t/rocky-linux-and-houston-ui-troubleshooting-and-where-to-report-s-w-and-h-w-issues/584/8 "2023-11-09T14:45:05Z")
I just gave that a go, I was getting clean updates though after running with --nobest once. I’ll have to dig later, but I don’t think realmd requires that package specifically for AD join. I haven’t noticed any issues so far, but I’ll dig a bit more into `dnf` later. The last RHEL based systems I worked in were CentOS 6 IIRC and we were still using `yum`. @daemon1001 I did manage to get the NVME carrier running in slot 3. After a bit of testing and troubleshooting last night, it seems Br2 was the right choice (IOU1) it just needed x4x4x8, as choosing x4x4x4x4 causes the error to pop up again Re: the Intel NIC drivers. In case anyone else with this board and the 2x NVME carrier from 45HL, I did the following: - Installed NVME card in PCIe Slot 3 (CPU Slot 3 is silk screened on the Motherboard.) - Boot into BIOS hitting Del at the SuperMicro splash screen. - In BIOS select Advanced \> Chipset configuration \> North Bridge \> IIO Configuration \> CPU Configuration \> IOU1 (IIO PCIe Br2). - Set this to x4x4x8… - Press F4 to Save and reboot. --- _[View the full topic](https://forum.45homelab.com/t/rocky-linux-and-houston-ui-troubleshooting-and-where-to-report-s-w-and-h-w-issues/584)._