I just gave that a go, I was getting clean updates though after running with --nobest once. I’ll have to dig later, but I don’t think realmd requires that package specifically for AD join. I haven’t noticed any issues so far, but I’ll dig a bit more into dnf later. The last RHEL based systems I worked in were CentOS 6 IIRC and we were still using yum.
@daemon1001 I did manage to get the NVME carrier running in slot 3. After a bit of testing and troubleshooting last night, it seems Br2 was the right choice (IOU1) it just needed x4x4x8, as choosing x4x4x4x4 causes the error to pop up again Re: the Intel NIC drivers.
In case anyone else with this board and the 2x NVME carrier from 45HL, I did the following:
- Installed NVME card in PCIe Slot 3 (CPU Slot 3 is silk screened on the Motherboard.)
- Boot into BIOS hitting Del at the SuperMicro splash screen.
- In BIOS select Advanced > Chipset configuration > North Bridge > IIO Configuration > CPU Configuration > IOU1 (IIO PCIe Br2).
- Set this to x4x4x8…
- Press F4 to Save and reboot.