# HL15 Beast Setup

**URL:** <https://forum.45homelab.com/t/hl15-beast-setup/3665>\
**Category:** Hardware\
**Tags:** help-and-suggestions\
**Created:** [November 29, 2025, 5:09am UTC](https://forum.45homelab.com/t/hl15-beast-setup/3665 "2025-11-29T05:09:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![gyrene2083](https://forum.45homelab.com/user_avatar/forum.45homelab.com/gyrene2083/32/2302_2.png) [@gyrene2083](https://forum.45homelab.com/u/gyrene2083)\
**Post date:** [November 29, 2025, 5:09am UTC](https://forum.45homelab.com/t/hl15-beast-setup/3665/1 "2025-11-29T05:09:37Z")

</div>

Is there a guide to setup the HL15 Beast? I see the guide for the HL15 and the HL15 2.0, but there is nothing for the HL15.

I purchased just the HL15 Beast Chasis. It seemed to come with all the wiring done for the fans and the fan hub. When I power on the system, I could see the hub light up, then turn off.

I am using a Gigabyte MZ32-AR0 v3 motherboard.

\*edit - I fixed the fans, they all work now. The headers are pretty far on this board so I tried ot use a noctua extension cable and that didn’t work, so I had to plug it into the board directly for it to work. It’s snug but not too tight.

I still would like to know if there is a guide though. Thanks

---

<div class="post-metadata">

**Author:** ![DigitalGarden](https://forum.45homelab.com/user_avatar/forum.45homelab.com/digitalgarden/32/1785_2.png) [@DigitalGarden](https://forum.45homelab.com/u/DigitalGarden)\
**Post date:** [November 29, 2025, 6:15am UTC](https://forum.45homelab.com/t/hl15-beast-setup/3665/2 "2025-11-29T06:15:49Z")

</div>

[https://45homelab.com/gettingstarted/hl15beast/](https://45homelab.com/gettingstarted/hl15beast/)

?