# HL15 Beast Proart Version - two dead SSD slots **URL:** \ **Category:** Hardware\ **Tags:** help-and-suggestions\ **Created:** [November 16, 2025, 6:18am UTC](https://forum.45homelab.com/t/hl15-beast-proart-version-two-dead-ssd-slots/3643 "2025-11-16T06:18:59Z")\ **Posts on this page:** 2\ **Page:** 1
**Author:** ![nertz](https://forum.45homelab.com/letter_avatar_proxy/v4/letter/n/d9b06d/32.png) [@nertz](https://forum.45homelab.com/u/nertz)\ **Post date:** [November 16, 2025, 6:18am UTC](https://forum.45homelab.com/t/hl15-beast-proart-version-two-dead-ssd-slots/3643/1 "2025-11-16T06:18:59Z")
I fully populated all 8 slots with SSDds, and only 3 of them showed up in the system. I tried different drives, eventully trying just a single SSD in each slow while watching dmesg -w. Here is what happens when I plug into either slot 1-17 or slot 1-19. All the other slots work properly, including the 15 3.5” bays. Error when plugging into port 1-19 - [624.435350] scsi\_io\_completion\_action: 27 callbacks suppressed [624.435355] sd 0:0:17:0: [sdb] tag#5031 FAILED Result: hostbyte=DID\_SOFT\_ERROR driverbyte=DRIVER\_OK cmd\_age=0s [624.435784] sd 0:0:17:0: [sdb] tag#5031 CDB: Read(10) 28 00 17 49 f0 a8 00 00 08 00 [624.435786] blk\_print\_req\_error: 27 callbacks suppressed [624.435787] I/O error, dev sdb, sector 390721704 op 0x0:(READ) flags 0x80700 phys\_seg 1 prio class 0 [625.311575] mpt3sas\_cm0: log\_info(0x31111000): originator(PL), code(0x11), sub\_code(0x1000) [628.936511] mpt3sas\_cm0: log\_info(0x31111000): originator(PL), code(0x11), sub\_code(0x1000) [629.687015] mpt3sas\_cm0: log\_info(0x31111000): originator(PL), code(0x11), sub\_code(0x1000) [633.436755] mpt3sas\_cm0: log\_info(0x31111000): originator(PL), code(0x11), sub\_code(0x1000) [634.187201] mpt3sas\_cm0: log\_info(0x31111000): originator(PL), code(0x11), sub\_code(0x1000) [634.936828] mpt3sas\_cm0: log\_info(0x31110635): originator(PL), code(0x11), sub\_code(0x0635) [634.936850] sd 0:0:17:0: [sdb] tag#5033 FAILED Result: hostbyte=DID\_SOFT\_ERROR driverbyte=DRIVER\_OK cmd\_age=10s [634.937326] sd 0:0:17:0: [sdb] tag#5033 CDB: Read(10) 28 00 17 49 f0 a8 00 00 08 00 [634.937330] I/O error, dev sdb, sector 390721704 op 0x0:(READ) flags 0x0 phys\_seg 1 prio class 0 [634.938129] buffer\_io\_error: 2 callbacks suppressed [634.938453] Buffer I/O error on dev sdb, logical block 48840213, async page read [638.658565] sd 0:0:17:0: Power-on or device reset occurred [646.801410] mpt3sas\_cm0: log\_info(0x31110d00): originator(PL), code(0x11), sub\_code(0x0d00) [646.801414] mpt3sas\_cm0: log\_info(0x31110d00): originator(PL), code(0x11), sub\_code(0x0d00) [646.801424] mpt3sas\_cm0: log\_info(0x31110d00): originator(PL), code(0x11), sub\_code(0x0d00) [646.801429] mpt3sas\_cm0: log\_info(0x31110d00): originator(PL), code(0x11), sub\_code(0x0d00) [646.801431] mpt3sas\_cm0: log\_info(0x31110d00): originator(PL), code(0x11), sub\_code(0x0d00) [646.801445] sd 0:0:17:0: [sdb] tag#3599 FAILED Result: hostbyte=DID\_SOFT\_ERROR driverbyte=DRIVER\_OK cmd\_age=8s [646.801445] sd 0:0:17:0: [sdb] tag#3600 FAILED Result: hostbyte=DID\_SOFT\_ERROR driverbyte=DRIVER\_OK cmd\_age=8s [646.801450] sd 0:0:17:0: [sdb] tag#3600 CDB: Read(10) 28 00 00 00 20 40 00 00 08 00 [646.801450] sd 0:0:17:0: [sdb] tag#3599 CDB: Read(10) 28 00 00 03 40 00 00 00 08 00 [646.801453] I/O error, dev sdb, sector 8256 op 0x0:(READ) flags 0x80700 phys\_seg 1 prio class 0 [646.801453] I/O error, dev sdb, sector 212992 op 0x0:(READ) flags 0x80700 phys\_seg 1 prio class 0 [646.801919] mpt3sas\_cm0: log\_info(0x31110d00): originator(PL), code(0x11), sub\_code(0x0d00) [646.802459] sd 0:0:17:0: [sdb] tag#3601 FAILED Result: hostbyte=DID\_SOFT\_ERROR driverbyte=DRIVER\_OK cmd\_age=8s [646.802906] sd 0:0:17:0: [sdb] tag#3598 FAILED Result: hostbyte=DID\_SOFT\_ERROR driverbyte=DRIVER\_OK cmd\_age=8s [646.803349] sd 0:0:17:0: [sdb] tag#3601 CDB: Read(10) 28 00 01 03 50 00 00 00 08 00 [646.803798] sd 0:0:17:0: [sdb] tag#3598 CDB: Read(10) 28 00 00 83 34 00 00 00 08 00 [646.804248] I/O error, dev sdb, sector 16994304 op 0x0:(READ) flags 0x80700 phys\_seg 1 prio class 0 [646.804705] I/O error, dev sdb, sector 8598528 op 0x0:(READ) flags 0x80700 phys\_seg 1 prio class 0 [646.805997] sd 0:0:17:0: [sdb] tag#3597 FAILED Result: hostbyte=DID\_SOFT\_ERROR driverbyte=DRIVER\_OK cmd\_age=8s [646.806001] sd 0:0:17:0: [sdb] tag#3597 CDB: Read(10) 28 00 10 00 18 00 00 00 08 00 [646.806003] I/O error, dev sdb, sector 268441600 op 0x0:(READ) flags 0x80700 phys\_seg 1 prio class 0 [647.408116] sd 0:0:17:0: device\_block, handle(0x0019) [649.907558] sd 0:0:17:0: device\_unblock and setting to running, handle(0x0019) [649.908120] sd 0:0:17:0: [sdb] tag#3624 FAILED Result: hostbyte=DID\_NO\_CONNECT driverbyte=DRIVER\_OK cmd\_age=3s [649.908125] sd 0:0:17:0: [sdb] tag#3625 FAILED Result: hostbyte=DID\_NO\_CONNECT driverbyte=DRIVER\_OK cmd\_age=3s [649.908127] sd 0:0:17:0: [sdb] tag#3626 FAILED Result: hostbyte=DID\_NO\_CONNECT driverbyte=DRIVER\_OK cmd\_age=3s [649.908133] sd 0:0:17:0: [sdb] tag#3625 CDB: Read(10) 28 00 01 03 50 00 00 00 08 00 [649.908133] sd 0:0:17:0: [sdb] tag#3624 CDB: Read(10) 28 00 00 03 40 00 00 00 08 00 [649.908133] sd 0:0:17:0: [sdb] tag#3626 CDB: Read(10) 28 00 00 00 20 40 00 00 08 00 [649.908136] I/O error, dev sdb, sector 8256 op 0x0:(READ) flags 0x0 phys\_seg 1 prio class 0 [649.908137] I/O error, dev sdb, sector 16994304 op 0x0:(READ) flags 0x0 phys\_seg 1 prio class 0 [649.908136] I/O error, dev sdb, sector 212992 op 0x0:(READ) flags 0x0 phys\_seg 1 prio class 0 [649.908144] Buffer I/O error on dev sdb5, logical block 512, async page read [649.908770] sd 0:0:17:0: [sdb] tag#3615 FAILED Result: hostbyte=DID\_NO\_CONNECT driverbyte=DRIVER\_OK cmd\_age=3s [649.908772] sd 0:0:17:0: [sdb] tag#3615 CDB: Read(10) 28 00 10 00 18 07 00 00 01 00 [649.908773] I/O error, dev sdb, sector 268441607 op 0x0:(READ) flags 0x0 phys\_seg 1 prio class 0 [649.908776] Buffer I/O error on dev sdb8, logical block 4103, async page read [649.908781] sd 0:0:17:0: [sdb] tag#3616 FAILED Result: hostbyte=DID\_NO\_CONNECT driverbyte=DRIVER\_OK cmd\_age=3s [649.908782] sd 0:0:17:0: [sdb] tag#3616 CDB: Read(10) 28 00 10 00 18 06 00 00 01 00 [649.908783] I/O error, dev sdb, sector 268441606 op 0x0:(READ) flags 0x0 phys\_seg 1 prio class 0 [649.908784] Buffer I/O error on dev sdb8, logical block 4102, async page read [649.908786] Buffer I/O error on dev sdb8, logical block 4101, async page read [649.908788] Buffer I/O error on dev sdb8, logical block 4100, async page read [649.908789] Buffer I/O error on dev sdb8, logical block 4099, async page read [649.908790] Buffer I/O error on dev sdb8, logical block 4098, async page read [649.908792] Buffer I/O error on dev sdb8, logical block 4097, async page read [649.908793] Buffer I/O error on dev sdb8, logical block 4096, async page read [649.908797] Buffer I/O error on dev sdb6, logical block 128, async page read [650.016810] sd 0:0:17:0: [sdb] Synchronizing SCSI cache [650.017847] sd 0:0:17:0: [sdb] Synchronize Cache(10) failed: Result: hostbyte=DID\_NO\_CONNECT driverbyte=DRIVER\_OK [650.018125] mpt3sas\_cm0: mpt3sas\_transport\_port\_remove: removed: sas\_addr(0x300062b21922afce) [650.018128] mpt3sas\_cm0: removing handle(0x0019), sas\_addr(0x300062b21922afce) [650.018129] mpt3sas\_cm0: enclosure logical id(0x500062b21922afc0), slot(20) [650.018131] mpt3sas\_cm0: enclosure level(0x0000), connector name( ) [654.657799] mpt3sas\_cm0: handle(0x1a) sas\_address(0x300062b21922afc8) port\_type(0x1) [654.784997] scsi 0:0:18:0: Direct-Access ATA INTEL SSDSC2BX20 DL2D PQ: 0 ANSI: 6 [654.785528] scsi 0:0:18:0: SATA: handle(0x001a), sas\_addr(0x300062b21922afc8), phy(8), device\_name(0x0000000000000000) [654.785530] scsi 0:0:18:0: enclosure logical id (0x500062b21922afc0), slot(19) [654.785532] scsi 0:0:18:0: enclosure level(0x0000), connector name( ) [654.786334] scsi 0:0:18:0: atapi(n), ncq(y), asyn\_notify(n), smart(y), fua(y), sw\_preserve(y) [654.786339] scsi 0:0:18:0: qdepth(32), tagged(1), scsi\_level(7), cmd\_que(1) [654.796169] sd 0:0:18:0: Attached scsi generic sg2 type 0 [654.796237] sd 0:0:18:0: Power-on or device reset occurred [654.796911] end\_device-0:18: add: handle(0x001a), sas\_addr(0x300062b21922afc8) [654.797957] sd 0:0:18:0: [sdb] 390721968 512-byte logical blocks: (200 GB/186 GiB) [654.798255] sd 0:0:18:0: [sdb] 4096-byte physical blocks [654.799729] sd 0:0:18:0: [sdb] Write Protect is off [654.800024] sd 0:0:18:0: [sdb] Mode Sense: 9b 00 10 08 [654.800856] sd 0:0:18:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA [654.857780] sdb: sdb1 sdb5 sdb6 sdb7 sdb8 [654.858077] sd 0:0:18:0: [sdb] Attached SCSI disk Error when plugging into port 1-17 - [805.974210] mpt3sas\_cm0: enclosure logical id(0x500062b21922afc0), slot(23) [805.974211] mpt3sas\_cm0: enclosure level(0x0000), connector name( ) [809.908613] mpt3sas\_cm0: handle(0x1a) sas\_address(0x300062b21922afcd) port\_type(0x1) [810.312620] mpt3sas\_cm0: log\_info(0x31111000): originator(PL), code(0x11), sub\_code(0x1000) [810.937814] mpt3sas\_cm0: log\_info(0x31111000): originator(PL), code(0x11), sub\_code(0x1000) [811.688068] mpt3sas\_cm0: log\_info(0x31111000): originator(PL), code(0x11), sub\_code(0x1000) [812.438487] mpt3sas\_cm0: log\_info(0x31111000): originator(PL), code(0x11), sub\_code(0x1000) [812.439077] end\_device-0:20: add: handle(0x001a), sas\_addr(0x300062b21922afcd) [812.439406] mpt3sas\_cm0: mpt3sas\_transport\_port\_remove: removed: sas\_addr(0x300062b21922afcd) [812.439410] mpt3sas\_cm0: removing handle(0x001a), sas\_addr(0x300062b21922afcd) [812.439413] mpt3sas\_cm0: enclosure logical id(0x500062b21922afc0), slot(22) [812.439415] mpt3sas\_cm0: enclosure level(0x0000), connector name( ) ---
**Author:** ![DigitalGarden](https://forum.45homelab.com/user_avatar/forum.45homelab.com/digitalgarden/32/1785_2.png) [@DigitalGarden](https://forum.45homelab.com/u/DigitalGarden)\ **Post date:** [November 16, 2025, 10:03am UTC](https://forum.45homelab.com/t/hl15-beast-proart-version-two-dead-ssd-slots/3643/2 "2025-11-16T10:03:46Z")
Contact [info@45homelab.com](mailto:info@45homelab.com) and they’ll help get you a replacement or whatnot.