# Any tips on getting the AOC-SHG3-4M2P to work?

**URL:** <https://forum.45homelab.com/t/any-tips-on-getting-the-aoc-shg3-4m2p-to-work/788>\
**Category:** General\
**Created:** [December 1, 2023, 9:16pm UTC](https://forum.45homelab.com/t/any-tips-on-getting-the-aoc-shg3-4m2p-to-work/788 "2023-12-01T21:16:53Z")\
**Posts on this page:** 1\
**Showing post:** 4

<div class="post-metadata">

**Author:** ![pcHome](https://forum.45homelab.com/user_avatar/forum.45homelab.com/pchome/32/1207_2.png) [@pcHome](https://forum.45homelab.com/u/pcHome)\
**Post date:** [December 2, 2023, 6:18pm UTC](https://forum.45homelab.com/t/any-tips-on-getting-the-aoc-shg3-4m2p-to-work/788/4 "2023-12-02T18:18:28Z")

</div>

I have that carrier card working in slot 3. I did not connect any additional power nor change the BIOS settings as I left everything at AUTO

It recognized the NVMes without any issues. I used “lspci” to confirm that the 4 NVMe slots were present (as part of the HL-15’s hardware).

Feel free to reply here or send a direct message.

2023-12-03T05:30:00Z  
There are 4 PCIe slots on the motherboard:

- Slot 6 which is PCIe x 16
- Slot 5 which is PCIe x 8
- Slot 3 which is PCIe x 8
- Slot 2 which is PCIe x 4 (in x8)

You stated you got it working in Slot 6 but what slot did you used for x8. I got it working in slot 3, can you try that slot?

---

_[View the full topic](https://forum.45homelab.com/t/any-tips-on-getting-the-aoc-shg3-4m2p-to-work/788)._